Unix and Linux Stack Exchange
Unix and Linux Stack Exchange

Questions tagged [huawei]

30 questions
8
votes
0 answers

Accessing regular linux commands in Huawei's Dopra Linux

Backstory: I have a Huawei HG8245 router in my house and I want to change the default username/password. I've tried following this guide but the config file always gets reset. My ISP isn't helping either so I'm looking for other ways to accomplish…
Dzeri96
  • 111
  • 2
  • 5
8
votes
1 answer

How to get audio in and out of Huawei GSM modems when doing a voice call?

I have a Huawei E160E and a Huawei K3765 "GSM"-modem. The question is: How to send and receive audio data placing or receiving phone/ voice calls with those modems? Both seem to support voice calls, according to specifications (E160E, K3765) and…
Golar Ramblar
  • 1,771
  • 1
  • 18
  • 28
7
votes
5 answers

Huawei E3372s + Linux (Rasbian), Incoming connections problem

I have a Linux-based OS (Rasbian) running on Raspberry Pi 2+ and it is using Huawei E3372s 4G/LTE USB Stick for internet connection. All my outbound connections work perfectly (Huawei USB mode changed using usb_modeswitch-ruling and Udev/rules.d)…
Janne Honkonen
  • 71
  • 1
  • 1
  • 3
4
votes
0 answers

Making voice calls using Huawei E1550

3G dongle Huawei E1550 is able to make voice calls using Huawei app in Windows. With search I found the same app for Linux (called Mobile Partner), seems it's working and makes calls, but without sound (tested on several machines). Is there any…
Eugene
  • 141
  • 1
  • 8
4
votes
4 answers

Convert OpenSSH public key to a PKCS#1 in HEX format with spaces and columns

I have SSH public key (generated on my Mac) in OpenSSH format like this: ssh-rsa…
Oldřich Švéda
  • 165
  • 1
  • 2
  • 8
3
votes
3 answers

Can't set DisplayPort output to 4k@60hz on the new Huawei Matebook 14 AMD

Just this week I got the newest Matebook 14 2020 AMD with the 4800H. On windows I'm using an UtechSmart USB-C hub to output 4K@60Hz to my monitor so physically I know it's possible. Linux, however, is another story. I installed Kubuntu 20.04 LTS,…
Dzeri96
  • 111
  • 2
  • 5
3
votes
1 answer

How to automatically load a new VID&PID to module usb_serial

I have a 4G module that requires me to run echo '03f0 581d' > /sys/bus/usb-serial/drivers/generic/new_id after every startup/resume to make the modem visible. How should I make this automatic? Add the VID&PID to usb-serial sources and…
varesa
  • 2,336
  • 5
  • 20
  • 19
2
votes
1 answer

Huawei 4G Hostspot (e5573s-606) not working in Slitaz(Linux based OS)

I was trying to connect my Huawei 4G Hostspot (e5573s-606) in Slitaz to connect via USB to the internet but it does not connect to the internet, rather, it mounts it as Removable Storage drive. On the same computer I have multiboot Windows 7,…
HN Singh
  • 29
  • 8
2
votes
1 answer

Can not delete/add default route

I have a Raspi connected through WiFi in which I plug-in a Huawei stick I use for SMS sending. Unfortunately when doing this, it changes the routes to the following: pi@raspberrypi:/opt/pi/printer $ route Kernel IP routing table Destination …
George M.
  • 23
  • 1
  • 4
2
votes
1 answer

3G modem connection only works after Windows

3G modem works only after Windows first successful negotiation, after if I unplug device and plug it again to Linux it works fine, even after reboots and poweroffs. But, if I change SIM card and try again it doesn't work, why? Every time I change…
Paul B
  • 121
  • 2
2
votes
0 answers

Why the connection speed is limited to 20-30 mbit/s in the case of a PPP daemon?

I'm configuring my LTE modem (Huawei E3372s-153, NON-HiLink), and I recently found out that this modem can work in two different modes: RAS and NDIS (NCM). The second one works just as normal NIC and allows to reach the full speed of the device. In…
Mikhail Morfikov
  • 10,309
  • 19
  • 69
  • 104
2
votes
1 answer

4G modem on an embedded 2.6.32.9 kernel on a Parrot AR Drone 2.0

I am attempting to compile support for a Huawei E3276 usb LTE modem for an embedded Linux/BusyBox installation on a Parrot AR Drone 2.0, which is based on kernel 2.6.32; however, I am running into some issues after loading the kernel modules. I…
Roland
  • 21
  • 3
2
votes
1 answer

My Mobile Internet connection is disabled even though it is enabled

I don't know how to better formulate the question. I have enabled the Mobile Broadband, and the system correctly detects that I have a Vodafone CZ HSUPA connection available on the SIM card. However, the item is non-clickable. I suppose it may be a…
yo'
  • 929
  • 2
  • 10
  • 20
1
vote
0 answers

Use UMTS Stick as a "dial in" modem - no dataplan required

I would like to create an on demand very low bandwidth data connection between two computers. For this I am planing to have a proxy and a client which both have a UMTS modem (e.g. Huawei e169). The simcard inside the proxy's UMTS stick has the…
Thomaschaaf
  • 171
  • 5
1
vote
0 answers

How to manage audio in and out from and to file of Huawei GSM modems?

I've got a Huawei E173 USB dongle connected to a Raspberry PI. I'm trying to use the device to make and receive calls. For my purpose, it is needed (i) to save audio of the call to file and (ii) to send audio to the telephony call from an input…
auino
  • 111
  • 1
1
2