Unix and Linux Stack Exchange
Unix and Linux Stack Exchange

Questions tagged [hp-printer]

18 questions
6
votes
1 answer

hp-setup can't find printer connected with USB

I'm having trouble with my HP LaserJet P1102 on an Arch Linux 4.19.2 system. lsusb shows that the printer is connected: Bus 002 Device 005: ID 03f0:002a HP, Inc LaserJet P1102 In journalctl, I see these messages when plugging in the printer via…
Matthias Braun
  • 7,797
  • 7
  • 45
  • 54
2
votes
1 answer

Printer stuck on insecure Samba version

I have an HP OfficeJet 8600 printer in my office that's around 10 years old but still works perfectly fine. I occasionally use this printer to scan to a samba share hosted on my DD-WRT router. I recently upgraded the software on the router, and I'm…
Ryan Knutson
  • 51
  • 4
2
votes
1 answer

Network printer always printing a single copy

There's an HP MFP M127fn printer on the LAN. Regardless of how many copies the print command is executed with, it only prints a single copy. This issue wasn't always around; I used to run Debian testing and a month or two back this change occurred…
Oxwivi
  • 2,232
  • 4
  • 23
  • 31
1
vote
1 answer

HP Color Laserjet 2600n - "Printer is not responding"

I've been trying to install an HP Color Laserjet 2600n printer for use over a network connection from my Linux desktop, but I can't get it working and I'm not sure what else to try. I am using Parabola, which is a libre variant of Arch. I have…
Time4Tea
  • 2,288
  • 5
  • 23
  • 54
1
vote
1 answer

Printer is always "waiting for the printer to become available"

My printer used to work very well with CUPS and the named driver. Since a while, it often shows the German equivalent of Waiting for the printer to become available (original: "Warte darauf dass der Drucker verfügbar wird") whenever I try to print…
Turtle10000
  • 73
  • 9
1
vote
0 answers

How to completely uninstal HPLIP

I have this annoying popup every time I start my pc and I don't know how to eliminate it and either the HPLIP. I tried this method without success…
The Dan
  • 111
  • 3
1
vote
1 answer

Printing does not work from my Raspberry Pi 4 and Cups 2.2.10

Anyone knows what could be the problem with Cups setup with my RPi 4 and laser printer? What could I do next? I want to be able to print from my laser printer from my phones, multiple computers and I don't want to bring my laptop to the printer. I…
ViliusK
  • 121
  • 1
  • 5
1
vote
1 answer

How to print several copies of a large postscript file on a printer with little memory?

I'm printing a postscript file containing a folder on my HP Laserjet 1320. I can print the folder one by one, but when I try to print a couple of them at one time, say 10, the printer doesn't have enough memory and signals an error. I guess this is…
PetaspeedBeaver
  • 1,207
  • 3
  • 15
  • 32
1
vote
0 answers

HPlip cannot find printer/scanner (HP Envy 5010)

Santa brought me a new printer - an HP Envy 5010 but I can't get it working. The paper documentation supplied with the printer was useless (omitted to mention that you need to / how to open the case and install ink cartridges) and the only setup…
symcbean
  • 5,008
  • 2
  • 25
  • 37
1
vote
1 answer

CUPS - Selecting a driver for a HP printer

I have a HP Photosmart Premium C309g-m printer. There is no matching driver in the list in CUPS installed on my raspberry pi. I tried to run sudo hp-setup but the terminal said sudo: hp-setup: command not found I just need to find a suitable driver…
Jeremy
  • 63
  • 1
  • 2
  • 8
1
vote
0 answers

Virtual PDF printer on the network

I have an application that only allows very rudimentary printer settings. In principle, only the IP of a network printer can be specified, which is then addressed via IPP (port 9100). Now I would like to get rid of the physical printers used for…
Patrick
  • 31
  • 1
  • 4
1
vote
1 answer

Setting up hplip on Trisquel 8.0

I've upgraded (from Trisquel 7.0) to Trisquel 8.0 with clean/fresh install. When I connected to printer (HP LaserJet P1007) it's detected while adding from settings>printers (system-config-printer) and I completed the setup;at last it asked whether…
Pandya
  • 23,898
  • 29
  • 92
  • 144
0
votes
0 answers

Linux Mint 21.1 HP printer printing white dots

I recently installed Linux Mint 21.1. The hp printer (mfp 226dn) is behaving strangely. If I print something from the computer, I get white dots in the text and images. But if I print a test page directly from the printer, there are no such white…
illo
  • 1
0
votes
0 answers

Printer not working on Void Linux

I have installed Void linux which is otherwise working very well. It certainly is a smooth and stable distribution with a great package manager (xbps) which does dependency resolution also. The packages in repository (e.g. LibreOffice) are fairly…
rnso
  • 199
  • 1
  • 1
  • 12
0
votes
1 answer

install laserjet 2200 printer from the command line using lpadmin

I am using arch linux kernel 5.7.2-arch1-1. All software is up to date. I am attempting to set-up a Laserjet 2200 printer from the command line using the utility lpadmin. While I am able to use the system-config-printer GUI utility to set up the…
Kes
  • 737
  • 1
  • 8
  • 20
1
2