Unix and Linux Stack Exchange
Unix and Linux Stack Exchange

Questions tagged [bananapi]

10 questions
3
votes
2 answers

Communication fails on DSA ethernet ports of Banana Pi R1 (Lamobo R1)

I don't get TCP/IP communication running on my Banana PI R1 on the switch ports (i.e., not the separate LAN port which shows up as eth0, which is working). It runs "Debian GNU/Linux 9.8", upgraded from an Armbian image with Debian 8 [1]. This is my…
Michael Kremser
  • 149
  • 2
  • 8
2
votes
0 answers

Ralink MT7601U (148f:7601) Wi-Fi adapter installation

I am trying to install a Ralink wifi adapter in Armbian. I have look this here but it did not lsusb Bus 004 Device 003: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter OS Version: Armbian 5.35 Bananapi Ubuntu xenial default…
Alparslan Bagriyanik
  • 21
  • 2
  • 4
1
vote
1 answer

Banana PI M2M (allwinner A33/R16) WiFI drivers in mainline kernel

I'm trying to get the WiFi working on a Banana PI M2M using the mainline kernel. The device tree definition of the banana pi m2m is very incomplete sun8i-r16-bananapi-m2m.dts I successfully managed to get SPI working but I am now struggling to get…
Adraen
  • 13
  • 2
1
vote
0 answers

"Mode not supported" on my Samsung tv

I'm using Banana Pi with Armbian, and when I connect my board to TV with HDMI cable, on TV's screen appears Mode not supported. My armbianEnv.txt looks…
NikoKunx3
  • 53
  • 5
1
vote
0 answers

What is causing SSH to stop working over wired connection when I plug in a wireless usb card?

I have a Banana Pi running some custom Arch distribution by Ryad. I plugged in a cheap wifi dongle with the Ralink RT5370N chipset. Under…
Jonathan Komar
  • 5,974
  • 7
  • 33
  • 52
0
votes
0 answers

No battery percentage on Banana Pi with ampripper (/sys/class/power_supply is empty)

I built a cyberdeck using a Banana Pi M2 Zero and an Ampripper 3000 wired to a battery. I don't know if it's even possible but: how can I see the battery percentage? As I said, the /sys/class/power_supply/ directory is empty.
Gisbi
  • 23
  • 8
0
votes
1 answer

PWM on BananaPi M2 0

"documentation" on Banana Pi Zero M2 is so chaotic it's even funny. goal: get PWM working. so I installed armbian, waited a week till my usb OTG cable came (because you'll just fail default SSH into it), configured ssh and followed steps in here to…
greengold
  • 103
  • 4
0
votes
0 answers

100% packet loss banana pi m2 zero, using an armbian release

I've cracked my head on this for a while. I can't ssh into my banana pi m2 zero(I don't have a mini-usb cord, I'm trying to boot wirelessly for the first time). I get 100% packet loss every time I try to ping it. I know it connected to the wifi. I'm…
Itachi
  • 1
0
votes
1 answer

[Error while Running the Gstreamer Example on Development Kit]; "File descriptor in bad state"

I'm running a basic application on Orange-Pi DVK with Gstreamer-1.4.0. While running the application it throws this error: AL lib: (WW) alc_initconfig: Failed to initialize backend "pulse" AL lib: (EE) ALCplaybackAlsa_reset:…
Ash
  • 131
  • 1
  • 1
  • 5
0
votes
0 answers

Is armbian for bananapi pro lacking luks support?

I have a bananapi pro and run armbian on it. I tried stable, testing and experimental (in that order) all with the same result. When I try cryptsetup luksOpen /dev/sda1 ext_crypt I get Enter passphrase for /dev/sda1: device-mapper: reload ioctl on…
Nikodemus RIP
  • 300
  • 1
  • 5