2

I have a hba card with two ports (port 0) and (port 1) and I want to know how can obtaining using OS the info to mapping the wwn that I can see using fcinfo hba-port command to a port of the hba card.

For example: If I have a WWN ending on xxxx890B, see that wwn is on port 0 of the hba card.

Rui F Ribeiro
  • 55,929
  • 26
  • 146
  • 227
vicdeveloper
  • 369
  • 2
  • 8
  • 16
  • Does `scanpci -v` show the WWN? (`scanpci` is probably in `/usr/X11/bin`) I don't have access to a Solaris instance with any HBAs right now to know for sure. – Andrew Henle Feb 18 '19 at 14:33
  • This command does not show the required information. :( . Output is here: pci domain 0x0003 bus 0x0002 cardnum 0x00 function 0x00: vendor 0x1077 device 0x2532 QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA CardVendor 0x1077 card 0x0171 (QLogic Corp., Card unknown) STATUS 0x0010 COMMAND 0x0147 CLASS 0x0c 0x04 0x00 REVISION 0x02 BIST 0x00 HEADER 0x80 LATENCY 0x00 CACHE 0x10 BASE0 0x00000300 SIZE 256 I/O BASE1 0x00100000 SIZE 16384 MEM BASEROM 0x00140000 SIZE 262144 MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x00 – vicdeveloper Feb 26 '19 at 19:05

1 Answers1

0

fcinfo hba-port is the command you're looking for, and Port WWN is the field that indicates the WWN specific to a port (vs the Node WWN, which is specific to the card).

More information is available at https://docs.oracle.com/cd/E53394_01/html/E54792/gqgjd.html. And while the docs are specific to Solaris 11.3, fcinfo should work on any version from Solaris 10 to current.

Tim Kennedy
  • 19,369
  • 4
  • 38
  • 58
  • This command does not provide me the required information. I mean, How can I map /dev/cfg/cX to a physical port on the hba card?. – vicdeveloper Feb 28 '19 at 16:55
  • You should see the port WWNs, like `HBA Port WWN: 2100001b329ca67b` and `HBA Port WWN: 2101001b32bca67b`. If you look at the first 4 characters of the WWN, you'll see `2100` and `2101`. In my experience with Solaris, characters 3-4 are always used for port identification. So in my example, 2100 is port 0, and 2101 is port 1 on a dual-port HBA. – Tim Kennedy Feb 28 '19 at 18:55
  • I used the fcinfo hba-port command again and I did not see that info: I have two physical hba cards with two ports each one. HBA Port WWN: 10000090fa1c0e42 Node WWN: 20000090fa1c0e42 HBA Port WWN: 10000090fa1c0e43 Node WWN: 20000090fa1c0e43 HBA Port WWN: 10000090fa1c044c Node WWN: 20000090fa1c044c HBA Port WWN: 10000090fa1c044d Node WWN: 20000090fa1c044d I cannot see in which PCI slot they are and in which physical port are each WWN. Regards, – vicdeveloper Mar 01 '19 at 20:20
  • I forgot about the PCI slot info. There should be an "OS Device Path" field in the `fcinfo` output. You may be able to dig into that OS Device path and figure out the PCI Slot. – Tim Kennedy Mar 01 '19 at 23:39
  • I have /dev/cfg/c3 and /dev/cfg/c4. I cannot find the relation about which WWN is on what port in my hba card. :S. – vicdeveloper Mar 03 '19 at 05:28
  • What do the command `cfgadm -al c3` and `cfgadm -al c4` show you? – Tim Kennedy Mar 04 '19 at 18:38
  • Here is the output: Ap_Id Type Receptacle Occupant Condition c4 fc-fabric connected configured unknown c4::50060e80103ae050 disk connected configured unknown Ap_Id Type Receptacle Occupant Condition c3 fc-fabric connected configured unknown c3::202700a0b86e5e1c disk connected configured unknown c3::50060e80103ae058 disk connected configured unusable – vicdeveloper Mar 04 '19 at 21:47
  • Thanks. Can you tell me what `prtdiag -v` shows you? – Tim Kennedy Mar 05 '19 at 14:38
  • Here is the output: 00 PCIe 1 1, abcd, 108e 2, 0, 2 okay 8, 8 network-pciex108e,abcd SUNW,pcie-qgc /pci@1,700000/network@0,2 00 PCIe 1 1, abcd, 108e 2, 0, 3 okay 8, 8 network-pciex108e,abcd SUNW,pcie-qgc /pci@1,700000/network@0,3 00 PCIe 3 2, 2532, 1077 2, 0, 0 okay 8, 8 SUNW,qlc-pciex1077,2532 QLE2562 /pci@3,700000/SUNW,qlc@0 00 PCIe 3 2, 2532, 1077 2, 0, 1 okay 8, 8 SUNW,qlc-pciex1077,2532 QLE2562 – vicdeveloper Mar 05 '19 at 18:11