Systemctl restart the `network` fail

Question

First of all, I am apology for the pictures, because I can not connect to the issue-machine, so I can not copy the code, only can post the photograph.

I use systemctl restart network, get fail.

So, I use the systemctl status network.service -l to check the error message:

I use journalctl -xe to check error message:

The /var/log/message error log:

My /etc/sysconfig/network-scripts/ifcfg-enp2s0:

This is my network-interfaces:

I tried add the HWADDR=00.30.18.14.7b.bb in my ifcfg-enp2s0, but still do not work.

EDIT-1

This is the journalctl -u network.service:

For a text form of this question, see the four-year-old question at https://unix.stackexchange.com/questions/100588/ . — JdeBP, Jan 24 '18 at 06:41
OMG - Oh My GNU! Screenshot ... then scp to another computer to make that correct .. or ... scp a text copy ... that is weird! — aurelien, Jan 24 '18 at 20:38
@aurelien You know the network-interface is down, I can not connect to it. — fanhualuojin154873, Jan 25 '18 at 02:34

score 1 · Accepted Answer · answered Jan 24 '18 at 03:08

According to ip, enp2s0 is showing as NO-CARRIER (i.e. the cable is not plugged in.) Are you sure that the cable is securely connected and working correctly? DHCP won't try to obtain an address until the interface is fully up, and setting the MAC address isn't usually required (especially if you're setting it to the default value for the card.)

score 0 · Answer 2 · answered Nov 21 '19 at 14:45

0

you maybe use the solution according to the following thread

Centos 7: failed to bring up/down networking: configure interface for a trunk interface

systemctl stop NetworkManager systemctl disable NetworkManager systemctl start NetworkManager

answered Nov 21 '19 at 14:45

周卓涵

1

Be careful, this will prevent `NetworkManager` from starting on boot. – Panki Nov 21 '19 at 16:15

Systemctl restart the `network` fail

2 Answers2