2

I'm trying to install Arch Linux on a Acer Spin 5 Laptop. I'm booting the latest archiso from a USB-Stick in UEFI mode and even before the system has fully started these errors appear during the boot sequence:

[...] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID)
[...] pcieport 0000:00:1c.0: device [8086:9d16] error status/mask=00002001/00002000
[...] pcieport 0000:00:1c.0: [0] Receiver Error
[...] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID)
[...] pcieport 0000:00:1c.0: device [8086:9d16] error status/mask=00002001/00002000
[...] pcieport 0000:00:1c.0: [0] Receiver Error      (First)

And lscpi tells me that 0000:00:1c.0 belongs to

PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #7 (rev f1)

These errors also appear (sometimes) when using wifi-menu to connect to my wifi. Sometimes this error does not occur at all, and sometimes it's spamming my shell.

Some times the error code also is [12] Replay Timer Timeout and sometimes [6] Bad TLP, but I don't know what it depends on.

Does someone know what might cause this error and how to fix it? It's very annoying and hindering me from installing arch.

herhuf
  • 255
  • 2
  • 10

1 Answers1

0

Try this steps:

  1. cp /etc/default/grub ~/Desktop

  2. Edit grub. Add pci=noaer or pci=nommconf at the end of GRUB_CMDLINE_LINUX_DEFAULT. Line will be like this:

    GRUB_CMDLINE_LINUX_DEFAULT="quiet splash pci=noaer"

  3. sudo cp ~/Desktop/grub /etc/default/

  4. sudo update-grub
  5. Reboot now
slm
  • 363,520
  • 117
  • 767
  • 871
Ehtesham
  • 142
  • 1
  • 6