1

I recently started using a live USB version of BackTrack 5 R1 (A kubuntu-based distro), but I can't find any way to enable access to my home WiFi network. I can't find any comprehensive tutorials on Google, and BackTrack's wiki on the subject is vague at best. How can I connect it to my home wireless?

daisy
  • 53,527
  • 78
  • 236
  • 383
Jon Valentine
  • 111
  • 1
  • 1
  • 3
  • You are working from a live distro where installing applications each time you launch it a good solution. This makes your question very specific to the distro that you are using. In a case like this, its usually best to seek help from the distro's support rather than a general place such as this. – jordanm Jan 09 '12 at 00:55
  • 1
    i've never used backtrack, but networking has been around since the earliest flavors of unix and is built-in to its very structure. why not just learn to edit /etc/network/interfaces with the relevant info? that's all i do now to access my wifi networks. – ixtmixilix Jan 09 '12 at 13:54
  • @ixtmixilix know about that... but i cant access any of the relevant info on the host computer. when i type ipconfig /all it just says "windows ip configuration" and nothing else – Jon Valentine Jan 09 '12 at 19:56

4 Answers4

2

Backtrack 5 R1 comes with wicd packaged. Wicd is a lightweight GUI network manager. I assume you know how to startx and not attempting to connect to wireless through the console. That would call for a different answer.

  • Open the Wicd network manager in Applications > Internet > Wicd Network Manager (you may also click the tray icon if present). Or start it from the command line $ wicd.

  • See if the wireless network you're looking for shows on the list. If it is a hidden network, click the down arrow next to the Network button, and type in the ESSID of the network.

  • If the network you want to connect to is listed, press the "Connect" button next to it.
  • If you get the message "This network requires encryption to be enabled." hit OK, and key in your WEP / WPA / WPA2 key.
stnly
  • 366
  • 2
  • 4
  • 2
    Or you can try running `wicd-curses` in your terminal, if you're so inclined. –  Jan 09 '12 at 11:33
  • Console: use of iwconfig, iwlist, ifconfig, and possible dhclient. – Jeff Ferland Jan 09 '12 at 17:22
  • yes i have seen wicd, but when i enable my networking with the command _service networking start_ the wireless network still will not show up. it is not a hidden network, and it is perfectly visible when i run Ubuntu – Jon Valentine Jan 09 '12 at 19:58
  • @ThatGuy `service networking start` turns the interfaces "on", but `wicd` is where you need to put the credentials so it can connect. – Novice User Jan 10 '12 at 18:03
1

Just launch wicd-gtk, since you're using the root user, wicd daemon will start automatically by you, and configure it in GUI. (There's a tray icon on the panel, right-most)

daisy
  • 53,527
  • 78
  • 236
  • 383
0

I've had this error as well, following the instructions on backtrack wiki you can solve the issue with the nektwork connection, the principal problem is the WICD that doesn't start and you cannot connect automaticaly.

/etc/init.d/networking start

dpkg-reconfigure wicd

update-rc.d -f wicd defaults

And this whould do the trick, also I reccomend to you that visit and suscribe on the backtrack forum,the link for the answer and also the wiki

poz2k4444
  • 405
  • 4
  • 12
0

Solution:

type the following in command prompt:

iwconfig

copy the name of wifi card: example wlan0

open wicd network manager--->preferences in the box "wireless interface", paste or type the name of your wifi card: example wlan0

click ok and you're good to go.

user32947
  • 1