I have a Asus UN42, the HDMI port seems is not working anymore, no signal is sent through this port, tried different cable. I now use the displayport. Is there any command to see what the problem is? Something to know the status of the HDMI port.
UPDATE
xandr produces this output:
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 32767 x 32767
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 885mm x 498mm
1920x1080 60.0 + 50.0 59.9 30.0 25.0 24.0 30.0 24.0
1920x1080i 60.1 50.0 60.0
1680x1050 59.9
1600x900 60.0
1280x1024 75.0 60.0*
1440x900 59.9
1366x768 59.8
1280x800 59.9
1152x864 75.0
1280x720 60.0 50.0 59.9
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3
720x576 50.0
720x480 60.0 59.9
640x480 75.0 72.8 66.7 60.0 59.9
720x400 70.1
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
lshw -C display produces:
*-display
description: VGA compatible controller
product: Haswell-ULT Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 0b
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:61 memory:f7800000-f7bfffff memory:e0000000-efffffff ioport:f000(size=64)
Now I'm using a displayport to HDMI cable plugged in my displayport. The HDMI has always worked fine, I was using a HDMI to DVI cable to connect my PC to the display, until suddenly stopped working without a reason apparently..
